Microsoft Support Number OR Call Toll-Free @ 1-844-478-2887

Friday, September 21, 2012

Configure Outlook 2010 Gmail POP3 Access

1- In Outlook 2010, click the File tab on the Ribbon. In the “File” menu that appears, click Info to display the “Account Information” screen shown below.

2- Click Add Account to open the “Add New Account” page of the “Auto Account Setup” wizard.]

3-Select the Manually configure server settings or additional server types option, then click Next. There is no need to enter any other information on this screen as we will be entering it on the next one.

4- On the “Choose Service” screen that appears, select Internet E-mail, then click Next. This opens the “Internet E-mail Settings” screen.

5-In the “User Information” section of the screen, enter your Name and full Gmail E-mail Address.

6-In the “Server Information” section of the screen, select POP3 as the “Account Type.”

7-For “Incoming Mail Server,” enter, and for “Outgoing Mail Server (SMTP),” enter

8- In the “Logon Information” section, enter your Gmail User Name. Include the “” So if your Gmail User Name is fred, you would enter in this field.
9- Enter your Gmail Password, and set the Remember Password option so you don’t have to manually enter your Gmail password every time Outlook wants to check for new mail.

10- Confirm that the Require logon using Secure Password Authentication (SPA) option is NOT selected.

11-Click the More Settings button to open the “Internet E-mail Settings” box, then click the Outgoing Server tab.

12-On the “Outgoing Server” tabbed page, set the My outgoing server (SMTP) requires authentication checkbox and then set the Use same settings as my incoming mail server option.

13-Click the Advanced tab to open the “Advanced” tabbed page.

14-In the “Incoming Server (POP3)” section, set the This server requires an encrypted connection (SSL) check box, then enter 995 in the box.

15- In the Outgoing server (SMTP) box, enter 587, then select TLS in the Use the following type of encrypted connection box.

16-Click OK to save these changes and return to the “Internet E-mail Settings” screen.

17-Click the Test Account Settings button to confirm that your Gmail Outlook 2010 connection is set up properly. After a moment or two, you should see a box with the message, “Congratulations! All tests completed successfully.” This tells you that all is well and you were successful in your attempt to configure Outlook 2010 for Gmail access. Click Close to close this box and return to the “Internet E-mail Settings” screen.

18-Click Next, then Finish.

Outlook 2010 Issues with yahoo email

These are what I had done.... 

1) Remove and reinstall MS Office - Not working
2) Start a new Outlook email - Not working
3) Reboot laptop back to out of box and reinstall MS Office - Not working
4) Changed  
Incoming Mail Server (POP3) is set to
Outgoing mail server (SMTP) to
Incoming server (POP3) should be set to port 995
Outgoing server (SMTP) should be set to port 465

Before, it was

5) Don't waste your time if you have similar issues.

Problem setting up Outlook 2010 with Office 365

The issue can be caused if one of the following factors is true:

1. The Always prompt for logon credentials is checked.

2. Office 365 Desktop Setup has been run, or the Microsoft Online Services Sign In Assistant is out of date.

3. The personal certificate needs to be refreshed.

Based on the situation, please try to troubleshoot the issue with the steps below:

1. Check Outlook settings

a. Open Outlook 2010. Click File>Account settings>Account Settings.

b. Click the E-mail tab, click the Exchange Online mailbox, click Change…

c. Click More Settings…. Click the Security tab, make sure the Always prompt for logon credentials box is unchecked.

When you logon in, please let the Remember my credential box is checked.

2. Run Office 365 Desktop Setup Apps

To do so, please log on Office 365, click Downloads under Resources on the right panel, and then click Set up under Set up and configure your Office desktop apps.

3. Delete the personal credentials

If you are running Windows 7, please remove the user’s stored credentials in Windows Credential Manager. To do this, follow these steps:

a. Click Start, click Control Panel, and then click Credential Manager.

b. Locate the set of credentials that is used to connect to Exchange. The credentials should be shown as MS.Outlook: or username@your vanity

c. Expand the set of credentials, and then select Remove from Vault.

If you are running Windows XP, please also remove the user’s stored credentials in Windows Credential Manager. To do this, follow these steps:

a. In the Stored User Names and Passwords dialog box, click the credential that you want, and then click Remove. The following message is displayed:The selected logon information will be deleted.

b. Click OK.

c. In the Stored User Names and Passwords dialog box, click Close.

If the issue still could not resolve, you can re-create an email profile for this in Outlook.
Microsoft Support Microsoft Office 2010 Support Microsoft Office 2013 Support

Thursday, September 20, 2012

Microsoft Office 2010 Click-to-Run technology ?

Microsoft offers a new way to download and install the Microsoft Office 2010 products. This technique is called Microsoft Office Click-to-Run.

Click-to-Run Office new broadband customers to obtain Microsoft Office and to update Office 2010. Click-to-Run Office Microsoft virtualization and streaming technologies.

Products Click-to-Run Office uses a similar technology to watch live streaming video online. When you look at the video Web, you can watch the first part of the video before the entire file is downloaded. In the same way you can start using Office 2010 before the whole suite or product is downloaded when you use Office Click-to-Run. So, the rest of Office 2010 available for download in the background quietly while you use Office 2010.

Currently only Microsoft Office Home and Student 2010, Microsoft Office Home and Business 2010 and Microsoft Office Starter 2010 on Office Click-to-Run, which includes the following applications in Office 2010: Microsoft Word, Excel, PowerPoint, Outlook, OneNote, Word Starter and Excel Starter.

Products Click-to-Run Office also uses Microsoft virtualization technology that stores the virtual application in Office 2010. This virtual space separates Office 2010 system as the default file and other applications on your computer. This separation makes the tape side of Office 2010 with all current versions of Office that is already installed on your computer. There are other advantages of Click-to-Run Office.

Click-to-Run products also almost half the disk space normal products will be repaired completely and will not break other software installed on your computer because they are private copies of all records and registration.

Install Microsoft Office 2010 Professional Edition

Microsoft's Office 2010 Complete Guide

Of course, a direct response to Google Apps, Microsoft scatter light, free version of the web browser Word, PowerPoint, Excel, and OneNote. All based in the cloud, the web version of this product has fewer features than their desktop cousins ​​but still give users basic tools to edit and change documents.

PowerPoint 2010

PowerPoint and just upgraded to a new version of the browser, but also a lot of bells and whistles that have been added to the desktop version. Users can now video editing tool status (ability to iMovie is not very different), and based image editing tool, Adobe Photoshop, a simple version has the ability to edit video and images within PowerPoint. Microsoft is also a spirited exchange with other users, enabling users to launch WebEx functions added. So create a slide show in PowerPoint, real-time (can be run on Sharepoint) and share it with others.

In video editing tools such as PowerPoint, look:

If you want to share a cabin, you can send e-mail to contact people. Click on the link, they will see a slide show using a browser. This feature can also be used in a mobile phone browser. You can also create a slideshow version of the desktop, and then publish to the web version of access through a browser. A PowerPoint version of the browser is a tool for video editing, but most of the functionality of the 2008 version of the browser.

Excel 2010

Excel spreadsheets can now in the browser, PowerPoint and so on can be done using the tables in version naršyklėje.Naršyklės desktop version of Excel limited features, but offers more functionality than Google. Microsoft has added a particularly innovative feature called sparklines, which gives a visual snapshot image data trend over time in the cells. You can also share Excel via the browser with other users, and specific licenses for who can view the document.

Here's what the web version of Excel looks like:

Word 2010

Bryant said that one piece of feedback from a number of users to create Microsoft Word documents, they want to keep documents created in the desktop version of the browser appearance. Microsoft calls this "document fidelity" and therefore create a browser version of MS Word. Browser, documents retain the same look and feel as the desktop. Version of the browser in the Ribbon user interface, where you can change the font, size, format, style, and so on.

Web versions of Word images:

Microsoft has also updated the desktop version, which is a common theme, so multiple users can edit a document at. This cooperation is not available in the online version, unfortunately. Microsoft says that users do not want this feature, but it can be a way to protect the Office revenue model.

When two people are editing the same document (desktop version) at the same time, Word notify each user when there are changes to be synchronized with your dokumentom.Copy / paste function of the desktop version also got an upgrade, you can watch the show live preview feature Pastor . Paste functions are also advanced options to create and insert screenshots. To navigate through a long document easier, Word now has a visual navigation pane and section header breakdown which makes it easy to move around the different documents.

Outlook 2010

Outlook 2010 offers a new ribbon user interface, such as Word, PowerPoint and Excel. The interface for the e-mail conversation has been upgraded to look almost like a message tree, allowing users more visual e-mails and calls. The search function has been improved, making it much easier to find content. In addition, you can view e-mails schedules and choose to ignore selective email conversations.

SharePoint 2010

Like Outlook, Sharepoint now ribbon user interface, which makes the product document hosting more similar to Microsoft Word product line. You can tag authors of documents now and can share documents and files easier.

Microsoft says that its browser versions have been tested in all major browsers other than Internet Explorer, including Firefox and Safari. Office 2010 remains being tested and reworked to work on Chrome. Microsoft has also announced that it simplifies the number of Office editions 8-5. Office Web applications will be available in three ways: through Windows Live, where consumers will have access to Office Web applications at no cost through the fixed versions, and via Microsoft Online Services, where customers can purchase a subscription of MS Office. Microsoft says Office 2010 will be available in the first half of next year.

The most important part of all this news is a free, Web versions of Microsoft Office products more popular. Bryant says that Microsoft expects to navigation products are particularly popular among students, but I think Web-based application will be very popular in the enterprise space as well, as long as there are precautions to put documents in a secure part of the cloud.

Tuesday, September 18, 2012

Outbox Email stuck in Outlook 2010

If a message seems to be stuck in the Outbox, continue with the following steps to remove the message of suspension or see a bad connection to the mail server will stop the message of the mission.

Canceled message compensation

To delete e-mail arrest, follow these steps:
In Outlook, click Send / Receive tab, and then click Work Offline.

Note: This prevents Outlook tries to send all emails.
Select the Outbox. Now you can:
Move the message to: Move the message to the Drafts folder. You can transfer the message to the Drafts folder, or you can right-click the message, select Move, select another folder, then select the Drafts folder in the list.

Note: This opens large messages by e-mail, and remove, resize and re-add the attachment before groped again to resend the e-mail.
Delete message: Right-click the message and select Delete.

IMPORTANT: If you receive the message "Outlook sends the message" close Outlook and wait outside. You can use the Windows Task Manager to make sure that it has completed the process Outlook.exe. Restart Outlook, and repeat the above steps to move or delete e-mail messages.

Click Send / Receive tab, and then click Offline selection. Restart the connection.

Note: The above steps are essential for the removal of corrupt e-mail or an e-mail with an attachment that exceeds the size limit set by the mail server. If the file you are trying to connect to e-mail a large file, consider the following options:
At work, put large files on a local network or a SharePoint site in your company and include a link to your site in the e-mail.
At home, you use Windows Live SkyDrive to store and send large files with friends and family. For more information on how to use SkyDrive, visit SkyDrive.

installation failures on Microsoft Office 2010 Updates

Microsoft has released an update for Microsoft Office 2010. This reduces the update installation failures for updates installed on Microsoft Office 2010. When you install Microsoft Office 2010 Service Pack 1 (SP1), Microsoft Update, you may receive the following error message: Code 78F Windows Update encountered an unknown error. If you download the package and install SP1 from the Microsoft Download Center, you may receive the following error message: Installation of this packaged failed. -X-file that is generated during the installation contains Officesuitewwsp1 none_msplog.log imitative following error message: Error 1935. An error occurred during the installation of assembly component Download the 32-bit update package now. Download the 64-bit update package now.

Friday, February 3, 2012

Solving a Microsoft Communicator Address Book Syncing Issue

I have a problem with systems that are using Microsoft Communicator 2007, where they are unable to synchronize the address book. This of course makes searching for contacts nearly impossible and is quite annoying. I Googled around and found all sorts of people with similar issues, but it appears the same symptom can be caused by many things. I’m going to describe what I did to fix my particular situation.

A really important detail in my situation, is that this was only affecting users that were on computers that were not part of our Active Directory domain, such as a personal PC at home. They would install Microsoft Communicator and connect up to the VPN, sign in and they would get connected, however there would be a little red exclamation point in the top right of the Communicator GUI that looks like this:

Communicator Error 1
When you select the twisty, you’ll see an error message that says “Cannot Synchronize Address Book”

When you select the menu item Cannot Synchronize Address Book you would get the following error dialog box:

Cannot synchronize with the corporate address book. This may be because the proxy server setting in your web browser does not allow access to the address book. If the problem persists, contact your system administrator.

The issue of course is you can not search for people from the global address book and are forced to add them manually.

For my particular situation, the problem was actually with the SSL certificate. Specifically the problem is the client computer can not get to the CRL (Certificate Revocation List) URL. For whatever reason, I’m still not sure why yet, the default URL for the CRL used HTTP instead of HTTPS. The IIS virtual web on our Microsoft Certificate Authority server listens on port 80 just fine, but then anything your request from it just returns:

The page must be viewed over a secure channel
The page you are trying to access is secured with Secure Sockets Layer (SSL).

Please try the following:

Type https:// at the beginning of the address you are attempting to reach and press ENTER.
HTTP Error 403.4 – Forbidden: SSL is required to view this resource.
Internet Information Services (IIS)
Technical Information (for support personnel)

Go to Microsoft Product Support Services and perform a title search for the words HTTP and 403.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled About Security, Secure Sockets Layer (SSL), andAbout Custom Error Messages.
Work around

Ok, I have a solution I will post a bit further down, but for those who don’t have control of the CA IIS configuration, here is a workaround. Now before you complain, what I am suggesting affects things globally on your computer. By default Windows is configured to stop when it can not reach the CRL, so what we need to do is tell it not to. You do this by doing the following from Internet Explorer:

1-Go to Internet Options
2-Select the Advanced Tab
3-Scroll down to the Security section, and then uncheck: “Check for server certificate revocation”.
4-Close IE
5-Exit out of Microsoft Communicator
6-Start Microsoft Communicatior

At this point if your problem is the same one I had, then the red exclamation should go away and you should have downloaded the address book and be able to search contacts by name.

My Solution

What I decided to do was to have the IIS server on the Microsoft Certificate Authority server issue a redirect for all HTTP requests, ie) http://yourcahostname -> https://yourcahostname

In order to do this I located the Default Web Site on the IIS server on our CA, and then changed the non SSL port from 80 to 8888.

Then I created a dummy virtual web site called https redirect and had it listen to port 80. Under the home directory tab I changed the content to “A redirection to a URL” and put in https://yourcahostname  and then checked the “A permanent redirection for this resource”.

Now when your SSL certificate tells the computer to go the HTTP CRL URL it will get a 302 redirect the the HTTPS CRL URL and things should just work.

Microsoft Communicator Mobile 2007 R2 Update

Microsoft Office Communicator Mobile is a versatile Java-based unified communications client for Microsoft Office Communications Server 2007 R2. Communicator Mobile runs on Microsoft Windows Mobile 6.0 or higher which includes Pocket PC and smartphone devices.

It also supports:
Motorola Razr V3xx
Nokia S40 series: Nokia 3120 Classic, Nokia 3600 slide, Nokia 5220/5310/5610 XpressMusic, Nokia 6212 classic, Nokia 6300i, Nokia 6301, Nokia 6500 classic, Nokia 6500 slide, Nokia 6600 fold, Nokia 6600 slide, Nokia 7210/7310/7510/7610 Super Nova, Nokia 7900 Prism, Nokia 8800 Arte.
Nokia S60 series: Nokia E 51/63/66/71, Nokia N95
This month they released an important hotfix update for Communicator Mobile 2007 R2.
What's cool about Communicator Mobile 2007 R2 is that it enables users running the app on their mobile phone to make work calls using their corporate phone system leveraging "Single Number Reach" functionality. This allows you to use a single telephone number on your business card. With Single Number Reach, your desk phone and mobile phone will ring when an incoming call arrives. Importantly, outbound calling on your mobile device also gives the same caller identity regardless of whether you use a desk phone or a mobile phone. Another key advantage in Communicator Mobile R2 is that you can simultaneously sign in to more than one application at the same time and have multiple options for communication. In order to keep presence information up to date, the presence indicator now shows "Mobile" as an option for your availability, enabling people to easily keep track of your status. Apparently they've done some major overhaul to the code from the prior version since Microsoft said they optimized the performance and battery life is now improved by 350 percent.

Using Communicator 2011 on a MacBook

Here’s how to do it.

1. Download Microsoft Communicator for the Mac 2011. I got mine from my MSDN subscription. I don’t think it’s available as a public download. I also don’t know if it’s part of the Microsoft Lync Server download (I’ve not been involved in the setting up of the Lync server).

2. It’s an iso file, so just mount it and install it in the usual way on your Mac. When it asks you for your login details, ignore it and cancel out.

3. Now the fun step. It seems you have to install a certificate as a root certificate on the Mac in order for Communicator to work securely (briefly: the TLS connection needs an X509 certificate to authenticate the server). Azret gave me the URI on our NAS for ours, so I just double-clicked it from within Finder. A Keychain Access dialog came up asking me if I trusted the certificate. I clicked “Always Trust”, and... nothing happened. The certificate wasn’t added. If I tried to login with Communicator (you need your email address, user id, and password), I got this:

Screen shot 2011-01-12 at 7.01.47

Obviously that’s not the way to do it, so I did more searching.

3 bis. This is where it gets squirrely. A lot of the advice out there is for the earlier Leopard version of Mac OS X or is for earlier versions of Messenger for the Mac and talks about having to add the X509Anchors keychain to the list in the Keychain Access utility (although it’s there by default in Leopard) and then adding your company server certificate to that. Sometimes, this advice forgets to add the word “Leopard” making it seem as if it’s valid for all versions of OS X. Since the keychain by default is restricted to writing, you have to issue chmod commands and such to open it up for modification. (See here for an example of such advice, although it does talk about SnowLeopard. Here’s a TechNet article that also sent me down another rabbit hole.)

The answer for SnowLeopard is actually very simple: open Keychain Access (it’s in /Applications/Utilities, although I tend to just use Spotlight to find apps); drag the root certificate to the login keychain; on the dialog that comes up click Always Trust.

4. Start up Communicator for the Mac, type in your email address, user id, and password (I also click the remember password checkbox) and click Sign In. Communicator starts up.

5. (This one’s a bummer.) It seems that Communicator for the Mac does not use Growl for alerts but instead uses its own system. Yah. Boo. Sucks.

Screen shot 2011-01-12 at 7.26.18

As you can see, I set the dock icon bounce to Continuously (the default is Once Only). That way, if I miss someone pinging me immediately, at least I have a better chance of seeing it fairly quickly. I prefer Adium’s bounce once every 5 seconds option though.

How to Integrate Office Communicator 2007 R2 32bit with Microsoft Outlook 2010 64bit Edition

If you find yourself in the situation where you have Microsoft Outlook 2010 64bit Edition Installed together with Communicator 2007 R2 you will find that without the proper Exchange Configuration you will not have access to your Outlook Contacts and your Presence in Communicator will not be synchronized with your Calendar or OOF Events.

In a 1:1 installation, meaning Outlook and Communicator both, 32bit, Communicator relies on Outlook to get the Presence and OOF information as well as Local Contacts. It does this by connecting to the mapi.dll, but more on this in a later chapter.

Here is how to get Presence, OOF and Contact Information synchronized with your 32bit Communicator even if you have Outlook 64bit or no Outlook at all.

Firstly you will need to update Communicator to 3.5.6907.0083 (, you need to do this because an automatic mechanism was added to Communicator to enable it to fall-back on a direct Exchange Connection when it is unable to connect to Outlook.
*Note: You will still get the Outlook Integration Error but you can ignore it as you should have the functionality, the error message is meant to inform you that you are not connecting via Outlook.
In Communicator CU6 3.5.6907.0206 (  the behavior was changed and the Error message does not appear anymore if you fall-back to an Exchange Connection.
Well after you have installed Communicator CU4 or CU6 all the work on the Communicator/OCS side is done; now we need to check your exchange CAS Server and the method you use for autodiscover.
The guys in the Exchange Team took a few moments to explain the workings of the autodiscover process… as it goes we have two options to get the autodiscover XML.
Outlook usually employs the SCP method and gets the CAS Server address buy LDAP Query, when you are in your corporate network. When you are outside the organization and a connection to the DC is not possible, Outlook will try to connect using the Exchange Web Services. In order to identify the Web Services it employs several look up methods, here is a KB Article describing the process in detail:

Coming back to our Problem, Communicator will not be able to identify the SCP in AD so it will always employ the second method and it will use Exchange Web Services. So all you need to do to enable Communicator Integration with your Exchange Server is to create a SRV Record pointing to your Exchange CAS Server or create a DNS Host A record [autodiscover.] pointing to the same CAS Server or HLB.
Now we got the discovery method covered, the next step is to create a certificate and assign it to the IIS Server on the CAS. The certificate has to be created by a CA that your Local Client trusts, no SELF-SIGNED Certificates allowed hereJ.
Request a Certificate from the CA of choice, internally you could potentially get one from your internal CA, but if you are using OWA you will need to assign a Public Certificate for the Servers designated for external connections.
The Certificate will typically have a SN with the Server name and some SAN like mail.,apart from the usual SN and SAN, used by Exchange, you will need to add another SAN to this certificate with the fqdn autodiscover.
Assign this Certificate to your IIS, do an IISRESET if the services are started and you should be up and running.
Communicator should at this stage be able to resolve the autodiscover. and get the XML with the EWS URL that is used to get the Availability (AKA Free-Busy) and OOF information as well as Local Contacts stored in your Outlook Profile.
*NOTE: You will need to set your URL in Exchange to FQDNs that are accessible from any location in and outside your network in order to have overall coverage for your Communicator integration.
More Information on how to How to Configure Exchange Services for the Autodiscover Service can be found under

Thursday, February 2, 2012

Fix Microsoft Security Essentials Install Error Code 0×80070645

Ever since Microsoft has released their Microsoft Security Essentials anti-virus and anti-spyware program, I’ve used it exclusively on all my Windows machines. It does a great job and has a fairly high detection rate as compared to other free anti-virus programs.
However, I recently ran into a strange issue that caused me some grief. Everything was running fine until one day Security Essentials said it was out of date and that I had to upgrade to a newer version. Ok, no problem. After a little while, I got the following error message:

security essentials
MSE Install Error Code 0×80070645
Whoops! It would not install the latest version, so I tried multiple things such as uninstalling Microsoft Security Essentials, downloading the latest version and trying to install that way. However, that didn’t work either. I got the same error message.

I ended up having to talk to Microsoft support and they suggest a couple of things, one of which finally worked. I will mention the different possible solutions and hopefully one of them will fix your problem.
Method 1 – Delete Registry Keys

Sometimes during the upgrade, there are two registry keys that do not get removed that should not be there. Navigate to the following registry key and delete them:
HKEY_CLASSES_ROOT – Installer – UpgradeCodes – 1F69ACF0D1CF2B7418F292F0E05EC20B
You can go ahead and right-click on the 1F69ACF0D1CF2B7418F292F0E05EC20B key and choose Delete.
HKEY_LOCAL_MACHINE – SOFTWARE – Microsoft – Windows – CurrentVersion – Installer – UpgradeCodes – 1F69ACF0D1CF2B7418F292F0E05EC20B
Again, go ahead and right-click on the 1F69ACF0D1CF2B7418F292F0E05EC20B key and choose Delete.
Once you are done, close the registry editor and go ahead and restart the computer. Now try to install Microsoft Security Essentials and see if you get the error or not. If so, continue reading.
Method 2 – Run Cleanup Tools

If you ever had any other security software installed on your PC, you will need to perform a cleanup in case anything was left behind during an uninstall. Secondly, if you still having something else running like an anti-virus or anti-malware program, you should uninstall it otherwise it will cause conflicts with Security Essentials.
You can check out this link below that lists out all the different cleanup programs for software like Norton, Avira, AVG, Kaspersky, McAfee, TrendMicro, ESET, etc.
Once you perform the cleanup, go ahead and restart your computer and try installing Security Essentials again.
Method 3 – Run FixIt

You can also run the Microsoft FixIt solution, which will uninstall Microsoft Security Essentials 1.0. It will remove all remnants of the program so that you can perform a fresh install of the latest version of MSE.
If you’re having problems with version 2.0 of Security Essentials or if you installed one on top of another or something else crazy, you can follow the instructions below to completely remove Security Essentials 2.0.
Method 4 – Use Windows Update

Your last possible solution here is to use the above links to completely remove all versions of Security Essentials that you may have installed and then to go ahead and run Windows Update only our Windows machine and install version 1 of MSE.
Then, once you have MSE 1.0 installed, download the MSE 2.0 installer and go ahead and run it. This has worked for quite a few people, so if you are really having issues, then give this a shot.
Method 5 – Windows Installer

Lastly, you could possibly have an issue with Windows Installer. In that case, one program may be blocking another program from installing properly. You can download the Program Install and Uninstall Troubleshooter from Microsoft, which will fix that problem if it is occurring.
That’s about it! If you are still having issues, you might have to open a case with Microsoft and see if they can help you.

Fix Microsoft Outlook has encountered a problem error

One of Microsoft’s favorite error messages is “Program X has encountered a problem and needs to close”. You’ll get this message from pretty much any Microsoft product, including Microsoft Office, Windows, and Internet Explorer. Previously I wrote about a way to fix Internet Explorer has encountered a problem and needs to close error.

fix this same error for Microsoft Outlook! It may look something like this:

AppName: outlook.exe      AppVer: 11.0.8010.0     AppStamp:232039e
ModName: msmapi32.dll      ModVer: 11.0.8002.0      ModStamp:32949d2
Microsoft outlook has encountered a problem.

These errors, unfortunately, are not easily fixed because there are multiple problems that can give the same error message! So you may see this error in Outlook only when you close the program or you may see it every time you try to check for new mail.
Each of these has be be resolved in a different way! So in this post, I will list out all the possible ways that I know of that you can fix this annoying “Outlook has encountered a problem” error and hopefully one of them works for you.
outlook encountered a problem

Method 1 – Install Windows and Office updates
I’m going to start off with the easier tips before going into more technical solutions. Go ahead and install all the latest Windows updates and the latest Office updates. If you have Outlook with Business Contact Manager, make sure to install the service packs for that also. This probably won’t solve your issue, but it’s worth a shot.
Method 2 – Delete and recreate email account
Sometimes this error may be related to the actual email account setup in Outlook. You can try to delete the email account by going to Tools and then Email Accounts or Account Settings.
tools email accounts

Click on the email account and then choose Remove or Delete.

outlook email accounts

Go ahead and recreate the email account and see if that resolves your issue.
Method 3 – Start Outlook without add-ons
Your problem may also be caused if you recently installed an Outlook add-on, so try to remember if you installed anything recently that would have installed an add-in to Outlook. For example, if you install Adobe Professional, it tries to install a PDF add-on to all Office programs.

If you install some kind of Outlook connector add-on, uninstall that and see if the problem goes away. Installing an anti-virus program such as AVG, etc may also install an add-on to Outlook. Other add-ons like spam filters (Cloudmark, etc) may also be causing the issue.

You can quickly tell if an add-on is causing the problem by starting Outlook without any add-ons. Basically, you are starting Outlook in Safe Mode.
Go to Start, then Run, and type in the following command in the Open box:
outlook /safe

If your problem goes away, then you know it’s one of the add-ons. In Outlook 2007, you can enable or disable add-ins by going to Tools, Trust Center and then clicking on Add-ins.

outlook add ins

In Outlook 2003, you can disable add-ins by going to Tools, Options, clicking on the Other tab, clicking on Advanced Options, and then clicking on Add-In Manager.
Method 4 – Uninstall any new software
You can also get this error in Outlook by installing some other third party software on your computer. For example, if you recently installed a new toolbar for IE, uninstall it. If you recently updated to a new version of IE, try to revert back to an older version. Sometimes other programs not related to Outlook can cause this error to appear!
Method 5 – Find the corrupt email and delete it
This may sound weird, but one particular email can actually crash the entire Outlook program! Oddly, I have seen this happen before. When you try to read one specific email in your Inbox, all of a sudden Outlook will crash and close without a notice.
You will have to go through your email and try to find the email or emails that cause Outlook to crash. Though this is very rare, it has happened and can be very frustrating to figure out. My suggestion would be to simply click on the first email and just arrow down through emails slowly until you reach the corrupt one.
Method 6 – Replace msmapi32.dll with an older version
Some people have sworn that by replacing this file with a different version, their problem has gone away. However, this is a bit more complicated as their are many versions of this file around and you have to figure out which one will actually work. It’s best to simply copy the one you have currently to a different location and then try out various versions of this file.
You’ll have to do a search on Google for msmapi32.dll to actually find and download the files, but this may work for some people.
Method 7 – Delete or rename auto-complete data file
You can also try to delete the auto-complete history file as that sometimes gets corrupt and can cause this error. First, make sure you can see hidden files and folders by going to Windows Explorer and clicking on Tools, Options, clicking on the View tab and choosing Show Hidden Files and Folders.
Now navigate to the following directory:
C:\Documents and Settings\Username\Application Data\Microsoft\Outlook
Now find the file with a .NK2 extension and either rename the extension to something else or simply delete the file. Outlook will automatically recreate it and hopefully the new version will be error free.
And that’s about it! If your problem still persists, you can always try to completely uninstall Outlook and reinstall it and see if that works. Other than that though, one of the above methods should fix your Outlook error!

Fix Microsoft Word has Stopped Working

I recently installed Office 2010 on a Windows 7 machine and everything worked fine for a few days, but all of a sudden when I open Word, I get the following error message:

It then gives me the option to check online for a solution or to close the program.
word has stopped working

After this, I could not even open Word 2010 anymore! It would simply close down the program. How annoying! Anyway, after doing some research, I finally got the problem fixed. Depending on your situation, the solution may be different. I will try to post all of them here and hopefully one will work for you.
Method 1 – Repair Office 2010/Office 2007

To perform a repair of Office 2010/2007, go to Start, then Control Panel and click on Programs and Features. Click on the Office 2010/2007 program and click Change.

word not working

Click Repair and then click Continue. Let the repair finish, which could take a while, and then restart your computer.
word stopped working

If you continue to get the “Word has stopped working” message, then keep reading for more possible solutions!
Method 2 – Disable All Add-ins

Sometimes an add-in that gets installed automatically by another program (such as Adobe, etc), might cause Word to crash. In this case, you can start Word in Safe Mode, which does not load any add-ins.
Simply click on Start and then Run or if you’re using Windows 7, just type the following command into the search box:

winword.exe /a
Now click on the Office button and click on Word Options.
word error
Click on Add-Ins and then disable all add-ins and try to load Word again normally.

disable word addins

Method 3 – Install Latest Updates

If that didn’t work for you either, then you should try to download and install the latest updates for your version of Office. Sometimes it’s a glitch that is fixed when you install the latest patches and fixes.
In Windows 7, you can go to Automatic Updates from the Control Panel and find the latest updates. You can also visit the Office download center and download service packs for Office 2007, etc:
Method 4 – Delete the Word Data Registry Key

There is a key in the registry that stores frequently used options in Word. If you delete the key, Word rebuilds it the next time you start Word by using the default settings.
You can delete the Word data key by going to the following location in the registry depending on your version of Word:
Word 2002:HKEY_CURRENT_USER\Software\Microsoft \Office\10.0\Word\Data
Word 2003:HKEY_CURRENT_USER\Software\Microsoft\ Office\11.0\Word\Data
Word 2007:HKEY_CURRENT_USER\Software\Microsoft\ Office\12.0\Word\Data
Word 2010:HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Data

delete word data key

Simply right click on the Data key and choose Delete. Now restart Word and see if the problem has gone away or not.
Method 5 – Remove Older Printer Drivers

Oddly enough, this ended up being the cause of my problem. I had an older print driver installed on my Windows 7 machine and once I removed that driver, Word started working without any problems!
You can delete individual printer drivers by going into the registry. Note that simply going to Printers and Faxes and deleting a printer there does not delete the printer driver.
Follow Step 3 in my previous post about a printer error to remove the printer drivers:
Method 6 – Uninstall Recent Software

At this point, you have also think about any software or plugins that you may have installed on your computer. Annoyingly, this problem with Word can be caused by a program that is completely unrelated to Word!
Did you recently install some new hardware? A printer, scanner, label machine, web cam, tablet, etc? Have you installed any software? If so, uninstall it and see if the problem goes away.
Method 7 – Completely Uninstall and Reinstall Office

If nothing has worked yet, there are not many options left! You can try to perform a full uninstall and then reinstall to see if the problem is fixed.
Go to this link first and download the Fix It solution for your version of Office:
Once you run that, go ahead and restart the computer and reinstall your version of Office.

Wednesday, February 1, 2012

Microsoft Communicator error ” Cannot Synchronize Address Book “

A common issue we see is clients getting an error stating “Cannot Synchronize Address Book”.  It looks like this:



This is an action that the OCS installation doesn’t take care of automatically so it happens pretty regularly.  To resolve it, select the Directory Security tab and click on the Server Certificate Button


After you click on the Server Certificate button, follow the Wizard, select Assign an Existing Certificate and assign the certificate used by your OCS Server for client logins.  Once you’ve assigned the certificate the SSL port on the Web Site tab should be filled in with port 443.

Sign your clients out of Communicator and then back in and the Address Book should be downloaded successfully

How to remove partially installed Office 2010 for installing it again?

In certain situations the installation process of Office 2010 freezes before completion, you cannot rollback it or uninstall it as there is no entry for this installation in the Add/Remove list. Moreover it’s also impossible to install any other version of Office (such as Office 2007).

You can try to manually uninstall Office 2010 by the steps below as suggested by Microsoft:

1. Download and install the Windows Installer Cleanup Utility.

2. After you install the Windows Installer CleanUp Utility, click Start -> All Programs -> Windows Install Clean Up.

3. Highlight Microsoft Office 2010 entry in the list and then click Remove. Quit the Utility.

Note: If you have got any other old or redundant office entries such as Office 2007 or other Office stand alone products such as Visio in the list, please remove them together.

4. Close all applications.

5. Click Start, in the Search box, type “regedit” (without the quotation marks) and press Enter.

6. Expand the registry tree on the left pane and locate the following two registry subkeys:

HKEY_CURRENT_USER – Software – Microsoft – Office
HKEY_LOCAL_MACHINE – Software – Microsoft – Office

7. Right-click on this registry subkey and click Delete to delete those keys.
8. Open Windows Explorer, and then browse to the “C:Program Files” folder

If it exists, rename the “Microsoft Office” to “Microsoft Office OLD”
If it exists, rename “OfficeUpdate” to “OfficeUpdateOLD”
If it exists, rename “OfficeUpdate14″ to “OfficeUpdate14OLD”

9. Click Start, in the Search box, type “%Temp%” (without the quotation marks) and press Enter.

10. Empty the Temp folder.

Note: If some files can’t be deleted, please skip them, which don’t influence the result of the troubleshooting.

11. Empty the Recycle Bin.

12. Restart your computer. Try to install Office 2010 again.

Remove Microsoft Office 2010 from your PC

If you got an error message that saying “this product installation has been corrupted. when trying to uninstall Office 2010 (beta), the tips that I found on Techgeekmore may help you.

There are two methods: Most probably the error is caused by a missing xml file from the Grove portion of the Office installation. However, if you haven’t installed Groove, there are other reasons also.

First method with Groove installed: To solve this issue, you will need a copy of your installation source / CD.

1 – Locate the Grove Folder on your installation Source / CD

2 – Copy the setup.xml from the groove folder, and paste it in C:Program Files – Common Files – Microsoft Shared – OFFICE14 – Office Setup Controller – Groove.en-us –

3 – Try to uninstall Office again

Second method without Grove Installed or without the Office Installation Source

Go to the Microsoft Support Page at Using the Microsoft Fix It function, you can solve your problem. The process helps you remove Office 2010 (also 2007) from your PC.

Microsoft Office 2010 Language DLL error

Problem-When I receive excel docs via outlook 2010 I receive the following error when
trying to open it up from an email. But once I hit Ok, it opens up the
excel 2010 sheet.
The language DLL 'VBE7INTL.DLL' could not be found.


If you find errors related to. Dll files that are preventing entering Windows, start your computer in safe mode to solve the problem. First try to restore your computer to an earlier date (if you have Windows XP or Vista). This form of solution is a quick and easy recommendation that solves many of the problems that may have Microsoft Windows.

Use SFC command from Windows XP to scan and repair Windows files. To run this command, follow these steps.
Click on start > run
In the run box type - sfc / scannow and press Enter.

How To Fix The Microsoft Office 2010 Error 1935

Step 1 - Repair The .NET 2.0 Framework Installation
The .NET framework is a type of computer application designed to help your system run various programs that have been coded in the .NET language. This is a very common type of Framework for most computers, but is constantly being damaged. To fix this, you should “repair” the framework with the steps below:

Click Start, select Control Panel, click Add/Remove Programs.
In the currently installed programs list, click Microsoft .NET Framework 2.0 then click Change/Remove.
Click Repair, then click Next.
Step 2 - Install A Fresh Copy Of The .NET 2.0 Framework
If repairing the installation of the .NET framework does not fix the problem, then you should look at installing a new copy, or reinstalling your current copy. To do this, just download the framework from the site below and install it – it will guide you through the rest of the process:

If a version of the .NET Framework is not installed on your computer, then install the .NET Framework version 2.0. To do this follow this link
Step 3 - Clean Out The Registry
Download this registry cleaner
Another way to fix this error is to use a ‘registry cleaner’ application to repair the various damaged settings the right might have. The registry is a database inside the Windows system which stores important settings & options for your PC. Unfortunately, this database is continually being damaged, preventing the installation of Microsoft Office 2010 from being able to use it correctly. To fix this problem, it’s highly recommended you use a “registry cleaner” program to fix any of the damaged settings that are inside this database. Not many people realize it, but this could be the reason why the 1935 error is appearing.

Windows XP Shows Error Message: Installation of Microsoft Office 2010 Requires MSXML Version 6.10.1129.0

When you try to install Microsoft Office 2010 in Windows XP, you might get following error message:

Setup is unable to proceed due to the following error(s):

The installation of Microsoft Office 2010 requires that MSXML version 6.10.1129.0 should be installed on your computer. Install the component and re-run the setup. Correct the issue(s) and re-run the setup.

To fix the issue, you can follow any of following solutions:

Solution 1:

Download and install Windows XP SP3 from here. SP3 contains MSXML, so it'll fix your problem.

Solution 2:

If you can't download and install SP3, you can manually download and install MSXML using this link.

Solution 3:

If the above solutions don't work for you, do as following:

1. Type regedit in RUN or start menu search box and press Enter. It'll open Registry Editor.

2. Now go to following key:


3. Right-click on win32 key and select Permissions.

4. Now select your username and provide Full Control to it.

5. After that in right-side pane, change value of (Default) to following:


NOTE: Here C: is system drive where Windows is installed in your system. If you have installed Windows in any other drive, change C: to that drive letter.

ERROR 1935 while installing Microsoft office 2010 on windows 7

Problem- Installing Office 2010 student not on Windows 7 64 bit, error 1935. Error 1935 during installation of assembly component (63E949F6-03BC-5C40-A01F-C8B3B9A1E18E). HRESULT: 0x800736FD. Online support orient myself to a problem of micrsoft.NET framework to repair or re-install, but on my computer windows 7 64 bit I have Microsoft Sync Framework and the updates tell me that everything is in order. The program windows installer appears to hang when launching some applications. An update is she to do? Windows update should do it automatically? Another error message noted that I did not have permission to execute the program / update, "contact your system administrator" when I'm the only profile and the only administrator on my computer. Any related reply for this ERROR 1935 while installing Microsoft office 2010 on windows 7 will be appreciated.

Start by disabling the UAC (user access control) completely before uninstalling Office 2010 completely and start your installation. To completely uninstall: 1) always safe: creating a restore point 2) you make a copy of your file C: \ Users \ [tonprofil] \ AppData \ Roaming \ Microsoft that contains your templates, dictionaries. (to adapt because you're on XP) If you use Outlook, also make a copy of your pst file that contains your mails in case you'd have left in the default folder for installation. 4) You download from MS Windows Install Clean Up and save the file offered on the Windows desktop. When the download is complete, double-click the file msicuu2.exe and follow the installation instructions. You will be able to solve the problem.

Monday, January 30, 2012

Word problem after uninstalling Office 2010

I did a clean install of Windows 7, and Office 2010. Then I realized I hate the ribbons, uninstalled Office, and installed Office 2003.

Now, this seems to have left some problem. As when I try to reply to an Outlook e-mail. I get one of the following errors below. I tried "detect and repair", but issue remains. Any ideas what I can do to fix..?

1)Microsoft Word is set to be your e-mail editor. However, Word is unavailable, not installed, or is not the same version as Outlook. The Outlook e-mail editor will be used instead.

or 2) a popup:

    Problem signature:
  Problem Event Name:   APPCRASH
  Application Name: WINWORD.EXE
  Application Version:  11.0.5604.0
  Application Timestamp:    3f314a2f
  Fault Module Name:    mso.dll
  Fault Module Version: 11.0.5606.0
  Fault Module Timestamp:   3f334cce
  Exception Code:   c0000005
  Exception Offset: 00073fe5
  OS Version:   6.1.7600.
  Locale ID:    1033

Additional information about the problem:
  LCID: 1033
  Brand:    Office11Crash
  skulcid:  1033

Read our privacy statement online:

If the online privacy statement is not available, please read our privacy statement offline:

Problems creating documents with Office 2010

When trying to create new documents for a case in TurboLaw, you receive an error message similar to the one shown below:


If you are using TurboLaw version 2.75 or earlier, the message will be different and it will say:

Error 429 - ActiveX Component can't create object

You may also receive a message saying that TurboLaw could not open a file of type "doc." After receiving these messages, your document will not open.

This problem is caused by having either the trial version of Microsoft Office 2010, or by having installed the Click-to-Run edition of Microsoft Office 2010.

Both of these versions of Microsoft Office use a new "Click-to-Run" technology which runs the program in a virtual environment, completely separate from the rest of your computer. Because of this, no 3rd party programs can communicate with Office programs (such as Word and Excel).

Microsoft has a knowledge base article regarding this known issue of "Click-to-Run" technology, as well as a list of other known issues with "Click-to-Run".

If you have purchased Microsoft Office 2010 and used the "Click-to-Run" install option, you will have to remove the "Click-to-Run" install and replace it with the full (or "classic") install. (Note: you do not need to re-install TurboLaw.)

The only ways you might end up with the "Click-to-Run" edition of Microsoft Office 2010 on your computer are if:

You purchased the Home & Student, Home & Business, or Starter edition online and downloaded it using the "Click-to-Run" install option, or;
You had a free trial of Office 2010 on your computer and you bought a license key online to "upgrade" it to the full version of Home & Student or Home & Business.
How to switch to the "full" (or "classic") install of Office 2010 instead of Click-to-Run
There is no additional cost involved if you switch to the “full” retail version of the Office Product that you purchased – only additional work on your part – and the Product Key is exactly the same. If you have any questions, contact Microsoft Support here.

You can also read these same instructions directly from Microsoft by clicking here.

Save all work, and then close all programs.
In Control Panel, open Programs and Features to see a list of installed programs.
Click Microsoft Office Click-To-Run 2010, and then click Uninstall.
To remove Microsoft Office Click-to-Run, click Yes.
Go to the Microsoft Office alternative fulfillment page.
Click My account.
Click Download, and then click Advanced options.
Follow the instructions.
To install the MSI-based Microsoft Office edition, run SingleImage.exe.
When prompted, type your Product Key to continue.
Once you have installed the full classic (non Click-to-Run) version of Microsoft Office 2010, you will be able to create documents with TurboLaw normally. You do not need to re-install TurboLaw.

How to tell if you have Microsoft Office 2010 Click-to-Run
If you are not sure if you have Microsoft Office 2010 Click-to-Run, here is how you can check:

Click your Start menu and then click on Control Panel.
In Control Panel, open Programs and Features to see a list of installed programs.
Scroll down the list of installed programs. If you see Microsoft Office Click-To-Run 2010 then you have the Click-to-Run edition of Microsoft Office 2010. If you see Microsoft Office listed, but it does not explicitly say "Click-to-Run," then you do not have the Click-to-Run edition.

Saturday, January 28, 2012

Errors From Microsoft Office 2010 Install

Browse: Home / 2011 / January / Errors From Microsoft Office 2010 Install
Errors From Microsoft Office 2010 Install

By Jason on January 25, 2011
Whorush: 2 sites by this AdSense ID

Whorush: 2 sites by this AdSense ID

It did not take long after the Office 2010 deployment to receive the first reported error. Although the deployment has been fine on 99% of the installs, during one of them the Windows Installer Service decided to take the day off. It gave this error:

    Error 1719: Windows Installer Service could not be accessed.

Normally, this wouldn’t be too terrible, you just start the installation process over again. The problem was that Microsoft Office 2010 thought it had been fully installed but it actually hadn’t trying to launch an executable would result in a long string of errors. The first one was this:

    Microsoft Word requires the file msointl.dll to run. Run setup again to assure proper installation.

Well, troubleshooting 101 tells us to follow the error’s advice and uninstall and reinstall the software. Of course, that can’t be pain free, so upon trying to uninstall the program through Add/Remove Programs or run the setup again, we receive this error:

    The language of this installation package is not supported by your system

So the software isn’t installed enough to operate correctly but it’s too installed to be able to reinstall the software. Great…

Fortunately, there is a Microsoft Fix it for this issue with the Office 2003, Office 2007, and Office 2010 suites. Just download the Fix It file, which comes as a .msi, and run through it. This will go through the uninstallation process and get us out of this situation.

After I ran this Microsoft Fix it on the computer, all traces of Office 2010 were completely removed. I then ran through the deployment process again and this time it completed without any issue. I was happy to find the Microsoft Fix It solution since I felt trapped between a rock and a hard place by not being able to uninstall the corrupted Office installation.

How to Install Microsoft Office on Ubuntu Linux

How to Install Microsoft Office on Ubuntu Linux: I've shown you the steps in installing Adobe Photoshop on Ubuntu Linux. This time, allow me teach you how to install Microsoft Word on Ubuntu. As some of you may know, I still use MS Word in favor of Writer. So if you are like me or if you have other reasons not to ditch Microsoft Office completely, perhaps you should follow this guide of installing MS Office on Ubuntu or on just about any other Linux distributions.

Note: I was using MS Office 2003 inside Ubuntu 10.04 "Lucid Lynx" but this guide may also work if you are using other MS Office versions or other Ubuntu versions.

1. Install Wine via Software Center, Synaptic Package Manager or via the command line:

$ sudo apt-get install wine

2. Download winetricks:

$ wget

3. Now install winetricks and other packages:

$ sh winetricks msxml6 gdiplus gecko vcrun2005 ie6

4. Configure Wine by navigating to Applications --> Wine --> Configure Wine, and then set "Windows Version" to Windows Vista inside the Applications tab.

5. From the “Libraries” tab, look for rpcrt4.dll and msxml3.dll and add them to “Existing overrides”. Edit Existing overrides and make sure the load order is set to “Native (Windows)”.

6. Download rpcrt4.dll (.zip) from HERE, and then extract it.

7. From the Wine menu, browse C:\ drive and navigate to windows/system32 directory. Copy the downloaded rpcrt4.dll inside system32 to overwrite or replace the existing rpcrt4.dll.

8. Put Microsoft Office installer, click on setup, and just follow the normal installation process.

9. After installing MS Office, configure Wine again and set Windows version back to Windows XP.

10. You can now use MS Office inside Ubuntu Linux by navigating to Applications --> Programs --> Microsoft Office.

Running MS Office Word 2003 inside Ubuntu 10.04 “Lucid Lynx”

installing and upgrading from Office 2007 to Office 2010.

I got the invitation for the Technical Preview of next Office from Microsoft, Office 2010. The new Office as usual comes in both 32 bit and 64 bit versions. And the best of all it can be easily upgraded from Office 2007 to Office 2010.

But when you upgrade just make sure you use the same versions that you have been previously using as in bit wise. If you are trying to install 64-bit version of Office 2010 while you have 32-bit version of Office 2007, then you would have a warning message like this.

    If you want to install 64-bit Office 2010, you must uninstall all 32-bit Office products first, and then run setup.exe in the x64 folder. If you want to install 32-bit Office 2010, close this setup. Then navigate to the x86 folder at the root of your CD/DVD and run setup.exe.

In short, you can upgrade from 32-bit Office 2007 to 32-bit Office 2010 and the same with 64-bit but not interchangeably.

Here are the screenshots flow of the installing and upgrading from Office 2007 to Office 2010.

Accept the license.


Enter the product key.


If you want to upgrade from previous versions click Upgrade or else use Customize.

Shows the flow of upgrade and installation of Office 2010.
Initial opening screen for the new Office applications, this is for Outlook 2010.
I am loving Office 2010 so far and soon we’ll be discussing and writing about new and exciting features in Office 2010 applications.

Microsoft Office Blue Edition x86/x64/2010 Pre Activated

System requirements:
Processor: 2.5 GHz.
RAM: 2 GB recommended (minimum 1 GB).
Hard drive: depends on the parameters set
Year: 2010
OS: Windows All
Developer: Microsoft
Interface: English / Multilanguage
Tablet: Is present

Microsoft ® Office 2010 offers powerful new ways to deliver the best work - whether you're at work, at home or in school - the computer's web browser, or smartphone.
Engage your audience's attention and provide them with their ideas with enhanced tools

The structure includes:

- Microsoft Word 2010
- Microsoft Excel 2010
- Microsoft Outlook 2010
- Microsoft PowerPoint 2010
- Microsoft OneNote 2010
- Microsoft Access 2010
- Microsoft InfoPath 2010
- Microsoft Publisher 2010
- Microsoft Project 2010
- Microsoft SharePoint Designer 2010
- Microsoft SharePoint Workspace 2010
- Microsoft Visio 2010

Microsoft intends to release Microsoft Office 2010 Technical Preview to invited guests who register to sign up for Office 2010 CTP Program only by July 2009.
Office 2010 was previously known by codename Office 14 (taken cue from its version), and wrongly assume to be Office 2009.
The setup installer of both 32bit (x86) and 64bit (x64) Office 2010 Technical Preview 1 (TP 1) has been leaked to BT network.
The leaked Office 2010 Technical Preview 1 has the version of 14.0.4006.1010, a pre-trial version provided to premium Microsoft partners.

It?s unclear whether it is the leaked Office 2010 TP1 build will be the version that is going to be released officially by Microsoft in July.
And it?s still unclear yet whether Microsoft will make available publicly for Office 2010 Beta downloads, which is said to be will be having 2 betas - Beta 1 in July 2009 and another Beta 2 in November 2009.
The betas is said to be different from Technical Preview, where TP is just meant as an engineering milestone for the development ofOffice 2010 and related products that leading to RTM that will reach in July 2009, according to Office 2010 IT Blog.
Office 2010 is expected to RTM and released as final product in March 2010, with the exception of Exchange Server 2010, where Exchange Server 2010 beta already available from official download links.

The setup installer of the leaked download will install Microsoft Office Plus 2010 edition, with Access 2010, Excel 2010, InfoPath 2010, OneNote 2010, Outlook 2010, PowerPoint 2010, Publisher 2010, and Word 2010.
Project Professional 2010,SharePoint Designer 2010 and Visio Professional 2010 are also included in the leaked RAR archive download.
Office 2010 supports Windows XP SP3, Windows Vista, and Windows 7.

Important note is that Office 2010 TP 1 is still in early stage of development, and may contain bugs, although most individual programs such as Word 2010 and Excel 2010 are usable in everyday life.
It?s also interesting to know that Office 2007, the predecessor ofOffice 2010, is version 12. Office 2010 will be version 14, skipping version 13, the number that Microsoft assumes may be not so lucky.

Microsoft Office 2010 Blue Edition (Fully Activated)
Microsoft intends to release Microsoft Office 2010 Technical Preview to invited guests who register to sign up for Office 2010 CTP Program only by July 2009.
Office 2010 was previously known by codename Office 14 (taken cue from its version), and wrongly assume to be Office 2009.
The setup installer of both 32bit (x86) and 64bit (x64)Office 2010 Technical Preview 1 (TP 1) has been leaked to BT network.
The leaked Office 2010 Technical Preview 1 has the version of 14.0.4006.1010, a pre-trial version provided to premium Microsoft partners.